In the autumn-winter period, when the air temperature drops below the zero mark, the question of the creation of a certain microclimate is acutely on construction sites. Simply put, heating. Such heating is needed not only for creating comfortable conditions for construction teams, but also to create a microclimate for various building materials and technological processes. Such a task is complicated due to the lack of clear boundaries on the construction site, where it is necessary to create a certain microclimate. In this case, it is quite difficult to calculate the required power of the heating device. Another difficulty is to determine the location of the heating device. Stationary thermal equipment, due to an impressive weight, is not quite suitable for solving such a problem. In such cases, mobile heaters come to the rescue.
The most common type of mobile heaters on construction sites are thermal fans. Such devices work on various types of fuel, it can be diesel fuel, kerosene, oil development or electric heater. If electric heat fans are usually used for domestic needs, then the diesel heat gun is most often used on construction sites. Such heat generators can heat significant areas. Diesel heat guns can be direct and indirect heating. When using a gun with direct heating, the spent gases fall into the heated room, so it should have a good ventilation system. In case of indirect heating for waste gases, a detachment of a retroactive is used, such units are considered safer. Diesel heat guns are rightfully considered the most powerful mobile devices that are designed to heat large rooms. Power, these devices, in some cases, can be more than 200 kW.
The diesel heat gun, which heats the room due to the directed supply of warm air, is an ideal option for creating a microclimate in large areas. The process of heating the room begins immediately after the start of the unit. Modern diesel guns are equipped with automatic devices that guarantee the device disconnecting during overheating, automatic devices control the combustion process, they also automatically heat the fuel and regulate the heating temperature. All these devices provide safe operation and extend the service life.