Since ancient times, parquet has been considered a symbol of prosperity. It creates not only beautiful, but also durable flooring. The main requirement – use of quality materials and compliance with styling rules. Later and more popular is the piece parquet more and more popular. It differs in the absence of varnish coating, due to which it is possible to carry out independent processing after laying and significantly increase the service life of the coating.
An important step for laying is the preparation of the base. The quality of the future sex largely depends on him. It is necessary to clean the construction waste, make an assessment of the concrete screed. In case of serious irregularities, cracks or other defects, they must be cleaned and leveled with a concrete mixture. In some cases, it is advisable to fill the floor with a special composition. Thanks to this, you can avoid the creaking of the parquet board.
In some cases, it is recommended to perform a waterproofing layer. Only after that you can proceed to the creation of a black floor. It allows you to carry out communications, hide the heating pipes. As the main material for the black coating, plywood is used.
For the installation of plywood sheets, both a concrete base and lags can be used, between which communications are carried out. The basic requirements for such a coating – Ideal evenness and dryness. These two parameters provide beautiful and durable parquet.
In order to lay a black floor, it is necessary to cut a moisture -resistant plywood into squares with sides of no more than 50 centimeters. This allows you to achieve uniform weight distribution and avoid serious deformations.
After this coating is prepared, you can carry out parquet work.
They consist in laying boards according to a given scheme using glue and mastic. Both connection options show high results. But the mastic does not apply to environmentally friendly materials, so for its use it is necessary to obtain permission from the sanitary and epidemiological supervision. Glue is not only a common, but also an affordable option. The most common glue for water -based parquet. True, they cannot be used with boards from valuable and exotic wood species. As a result of poor interaction, surface deformation may occur. For such cases, adhesive based on resins is used.
When laying a parquet, it is important to observe the rule: for prominent places, use only the best dies, in hidden places you can use cheaper options. It is also important to make a drawing.
Parquet can be laid a Christmas tree. This option represents a beautiful combination of drawing and high reliability. When working, special caution is observed, and the bar is placed by scallops to themselves.
Another alternative is deck laying. It is characterized by the simplicity of creating and universality. Such parquet can be used in any room. The most common styling options with a displacement of half or a third in the direction of the light. To create a more original drawing, the use of a French deck is allowed. In this case, strips of different lengths and width are used.
Other styling options can be attributed to squares, rhombuses or artistic pattern.
After the entire pattern is laid out, it is necessary to process the floor with protective compounds and varnish. High -quality coating will serve and delight their owners for many years.