For the construction of a bath at minimal costs and to achieve high quality structure, it is recommended to use a bar.
This type of material is perfect and thanks to lightness for it you do not need to equip a powerful foundation. Using a timber, construction time is reduced significantly, and in addition to the possibility of avoiding a long styling, after it it is not necessary to expect a shrinkage of the wall.
The increased strength of the bar of the bath is explained by the excellent qualities of natural wood. Also, having low thermal conductivity, a wooden beam ensures the maintenance of heat indoors. For the indicated reasons, turnkey beam baths are in wide demand among hot steam lovers, who during water procedures retain a favorable microclimate inside. The assembly of a bath from such material will be able to even unprofessional builders. After all, the beam is cut off from two or four sides by a log having a cross section of a rectangle or square, which allows you to collect a log house as a children’s designer.
Due to the low degree of shrinkage of the beam, the interior decoration of the bath can be proceeded almost immediately upon completion of the manufacture of the log house. If a profiled timber is used in construction, then the exterior decoration with a hemp is not needed at all. Such a product with smooth side sides has an attractive appearance. This timber has practically does not have cracks, since when it is profiled, natural internal tension decreases, and the core with a high content of resin is removed, which prevents the premature softening of the structure of the tree.
When using a beam in the construction of a bathhouse, traditional brackets with studs are used in fastening, heated with bolts, anchors are adjustable. To reduce the percentage of shrinkage when assembling a log house, a forced screed of the construction structure is used.