GRASSELLO DI CALCE (Grasselo Di Calce) is a decorative mineral plaster designed for internal work using air lime. With its help, you can create a coating-mitation of classic wall mural of the ancient era. In connection with such indicators, this plaster is used in the design of buildings that are built in an antique or classic style. At the same time, it is soft and plastic, which allows you to obtain an imitation of marble, polished to a mirror shine. Grassello di Calce is supplied in two basics: white and transparent. Both allows you to get a variety of finishing options due.
You do not need any additional work in working with the decorative mineral coating of this brand, the material can be used immediately after opening and immediately create a realistic coating that simulates ancient coating or marble using a special set of construction tools and the abilities of the one who coating.
The main recommendations when using decorative mineral plaster:
Before starting work with decorative mineral plaster Grassello di Calce, the surface must be thoroughly cleaned. After the preparatory work is completed and after the surface is dry, you can apply the first layer of decorative mineral plaster. It is best to do this with the help of stainless steel cell, making a trial bar in advance in a small section of the wall, avoiding direct sunlight. Application must be carried out with pressure, movements in different directions, on the surface of the wall evenly distributing the composition. If there is a need, you can apply a second layer of plaster after 12 hours so that the surface is flat. Another 12 hours later, the surface must be sanded with fine sandpaper and remove the dust from it. Next, you can apply the final layer of coating to the wall. This must be done with the same stainless steel cell, in small strokes, so that the coating is tamped and polished until the moment the coating is completely dry. In the event that the processed surface poorly absorbs the plaster, it can be moistened before applying in order to avoid exfoliation of the coating.
Due to the fact that the plaster GRASSELLO DI Calce is subject to a lot of factors, it should be protected from low temperature, high humidity and direct sunlight until it has completely dried. The ideal temperature for the process of working with this type of plaster – +10 ° C – +35 ° C, air humidity – not more than 80%.
Using Sistema Tintometrico Macromie, you can give the corresponding tone of the coating. In this case, the composition must be prepared immediately for the entire volume, so that the tonality does not differ among themselves in different processed areas, especially if the composition is obtained from different parties. At the same time, in order to increase moisture resistance, it is advisable to apply a special protective varnish or wax on a wall already processed by the Grassello Di Calce plaster. They will create a protective film that will protect the coating from direct exposure to moisture. After the work is completed, you need to thoroughly wash all the tools that were used in the work.